Sealey GSS1508 Instructions Manual

Also see for GSS1508: Instructions

INSTRUCTIONS FOR:GALVANIZED STEEL SHEDMODEL No: GSS1508Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructionsand properly maintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS ANDCAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAYCAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.Before commencing the assembly, we recommend that you read the instructions thoroughly. Yournew shed comes with all the holes pre drilled to make for fast easy assembly. We recommendthat you assemble the shed using a trestle table or sawhorses and planks. This will ensure thatyou are working off the ground and make it easier for you. Assembly is a two person job andshould not be attempted in windy conditions.Step 1: Check all parts against the component list.Step 2: Assemble the rear wall panels.Step 3: Assemble the side wall panels.Step 4: Assemble the roof panels.Step 5: Assemble the front wall panels.Step 6: Assemble the front door.Step 7: Fit the panels together.Concrete Slab: It is recommended that your new shed is secured to a concrete slab as per thespecifications in this manual. WARNING! Ensure Health & Safety, local authority, and general workshop practiceregulations are adhered to when building this shed. Keep the work area clean, uncluttered and ensure there is adequate lighting. Keep children and unauthorised persons away from the working area. DO NOT use the shed for any purpose other than that for which it is designed. Use appropriate safety clothing including eye protection.Note! The assembly of this product will require assistance.