Sealey CREE XPE MOTION SENSOR+ Quick Start Manual

HEAD TORCH 3W CREE XPE MOTION SENSOR +HAND TORCH 3W CREE XPEMODEL NO: HT110Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,and properly maintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.1. SAFETY1.1. General8 DO NOT shine directly into your, another person’s or an animal’s eyes.8 DO NOT allow children to use the torch.8 DO NOT use the torch if you suspect that the battery or the torch casing is damaged.8 DO NOT leave batteries in a discharged state. Before storage remove batteries.1.2. Battery Safety WARNING! To reduce the risk of burns or fire:8 DO NOT attempt to open the batteries.8 DO NOT crush, puncture, short contacts or dispose of in fire or water.8 DO NOT expose to temperatures above 60°C (140°).9 Replace only with the batteries designed for this product.9 Recycle or dispose of used batteries as stipulated by local regulation.9 If the electrolyte in the batteries gets on your skin, thoroughly wash with soap and water. If it gets in your eyes, rinse thoroughly withcool water and seek immediate medical attention.2. INTRODUCTIONSuper bright twin pack includes a hands-free 3W CREE XPE LED head torch producing 180 lumens and a 3W CREE XPE LED hand held torchproducing 120 lumens. Head torch features three light settings (full light / half light / blink) and a motion sensor function allowing the user easeswitching on and off. Hand held torch features five light settings (full light / half light / low light / flash / SOS) plus the option to adjust the focus ofthe light. Head torch powered by 3 x AAA, hand torch powered by 1 x AA (both supplied).3. SPECIFICATIONModel No: ....................................................HT110(Head torch) ............................. HT110(Torch)LED quantity:................................................1 x 3W CREE XPE........................1 x 3W CREE XPELumen output: ..............................................180lm ................................................................120lmBattery: .........................................................3 x AAA ............................................................ 1 x AA4. OPERATIONRefer toInstructionsHT110 Issue:1 - 17/07/18Original Language Version© Jack Sealey Limited

/ 2

Related manuals for Sealey CREE XPE