Sealey CP20VRSX Quick Start Manual

BRUSHLESS RECIPROCATING SAW20V - BODY ONLYMODEL NO: CP20VRSXThank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,and properly maintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.1. SAFETY1.1. GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fireand/or serious injury.9 Save all warnings and instructions for future reference.1.2. WORK AREA SAFETY9 Keep work area clean and well lit. Cluttered or dark areas invite accidents.8 DO NOT operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power toolscreate sparks which may ignite the dust or fumes.9 Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.1.3. PERSONAL SAFETY9 Stay alert, watch what you are doing and use common sense when operating a power tool. DO NOT use a power tool while you aretired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in seriouspersonal injury.9 Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hardhat, or hearing protection used for appropriate conditions will reduce personal injuries.9 Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, pickingup or carrying the tool.9 Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.8 DO NOT overreach. Keep proper footing and balance at all times. This allows better control of the power tool in unexpected situations.9 Dress properly. DO NOT wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes,jewellery or long hair can be caught in moving parts.9 If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.1.4. POWER TOOL USE AND CARE8 DO NOT force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer atthe rate for which it was designed.8 DO NOT use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch isdangerous and must be repaired.9 Hold the power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contacthidden wiring.9 Use clamps or another practical way to secure and support the workpiece to a stable platform. WARNING! Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments,changing accessories, or storing power tools.9 Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions tooperate the power tool. Power tools are dangerous in the hands of untrained users.9 Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect thepower tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained powertools.9 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier tocontrol.9 Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions andthe work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.1.5. SERVICE9 Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of thepower tool is maintained.2. i INTRODUCTIONPowerful brushless and cordless reciprocating saw suitable for cutting wood, board and soft metals. Durable composite housing with soft grip foradded comfort. Keyless blade change system. Blade is controlled by a variable speed trigger switch with a brushless motor that runs to a maxspeed of 3100spm. 2-Stage operation switch for added safety. With an LED work light. Requires compatible 20V battery and mains charger, soldseparately.Refer toinstructionmanualWear eyeprotection Wear amask Wear earprotection Wear protectiveglovesOriginal Language Version© Jack Sealey Limited CP20VRSX Issue 1 17/11/21

/ 3

Related manuals for Sealey CP20VRSX