Sealey CP20VPHT Instructions Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,and properly maintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.1. SAFETY9 Always wear appropriate eye protection, ear protection, substantial footwear, gloves, long trousers whilst operating.9 Always use head protection when operating the extended-reach hedge trimmer overhead. Falling debris can result in serious personal injury.9 Remove ill fitting clothing. Remove ties, watches, rings and other loose jewellery and contain long hair.9 Inspect and ensure equipment is in good working order before use.9 Maintain and clean tool and battery pack, regularly. Check air holes are clear.9 Must be serviced by an authorised agent. Use genuine parts only. Non authorised parts will invalidate the warranty.9 Keep all parts of the body away from the blade. Do not remove cut material or hold material to be cut when blades are moving. Bladescontinue to move after the switch is turned off. A moment of inattention while operating the hedge trimmer may result in serious personalinjury.9 Make sure the switch is off when clearing jammed material.9 Carry the hedge trimmer by the handle with the blade stopped and taking care not to operate any power switch. Proper carrying of the hedgetrimmer will decrease the risk of inadvertent starting and resultant personal injury from the blades.9 When transporting or storing the hedge trimmer, always fit the blade cover. Proper handling of the hedge trimmer will decrease the risk ofpersonal injury from the blades.9 Hold the hedge trimmer by insulated gripping surfaces only, because the blade may contact hidden wiring.9 Always use two hands when operating the extended-reach hedge trimmer. Hold the extended-reach hedge trimmer with both hands to avoidloss of control. WARNING! Remove battery before: performing maintenance, carrying out adjustments, inspecting the machine after striking an object,before clearing a blockage, before leaving the tool unattended, before moving to the next job location.9 WARNING! Risk assess the work area. Keep bystanders away from the work area. DO NOT operate with anyone or pets nearby. Checkintended work area for wildlife.8 DO NOT use in bad weather conditions, especially when there is a risk of lightning. DO NOT expose to rain. Only use in good light.8 DO NOT use if tool vibrates abnormally, switch off, remove battery and then inspect.8 DO NOT touch hazardous moving parts. Allow to come to a complete stop first.8 DO NOT operate whilst tired, ill under the influence of alcohol or other intoxicating drugs.8 DO NOT overreach and keep balance at all times.8 DO NOT use if damaged. DO NOT operate with defective guards or shields or without safety devices.8 DO NOT use for a task it was not designed to perform.9 Store with the battery removed and separate from the machine, in a dry, childproof location. WARNING! Never allow children, persons with reduced physical sensory or mental capabilities or lack of experience and knowledge orpeople unfamiliar with these instructions to use the machine, local regulations may restrict the age of the operator. WARNING! To reduce the risk of electrocution, never use theextended-reach hedge trimmer near any electrical power lines.Contact with or use near power lines may cause serious injuryor electric shock resulting in death. WARNING! Always check hedges and bushes for foreignobjects, e.g. wire fences and hidden wiring.2. INTRODUCTIONCordless telescopic Hedge Trimmer head – body only. Ideal forprecision cutting tall hedges and shrubs. To be used in conjunction withtelescopic pole Model No. CP20VTP (sold separately). High qualitycutting performing trimmer with 90° rotating head which is ideal forthose difficult to reach areas. No load speed of 1300spm and cuttingdepth of 15mm. Requires compatible 20V battery and mains charger,sold separately.Original Language Version© Jack Sealey LimitedRefer toinstructionmanualWear protectivegloves Wear faceshield Wear earprotection Wear protectiveclothing20V CORDLESS POLE HEDGE TRIMMER -BODY ONLYMODEL NO: CP20VPHTWearappropriatefootwearKeep awayfrom rainCP20VPHT Issue 1 22/10/21Wear HeadProtectionCP20VPHTCP20VTP (sold separately)Beware ofElectricalPower Cables

/ 4

Related manuals for Sealey CP20VPHT