Sealey AUTO SERVICE VS401 Instructions Manual

! Keep this product in good working order and condition, take immediate action to repair or replace damaged parts.! Use approved parts only. Unapproved parts will invalidate the warranty.! Keep children and unauthorised persons away from the work area.! Keep work area clean and tidy and free from unrelated materials.! Ensure the work area has adequate lighting." DO NOT use the kit to perform a task for which it is not designed." DO NOT hold pump inlet against the skin whilst using the pump." DO NOT allow untrained persons to use the kit." DO NOT use whilst under the influence of drugs, alcohol or intoxicating medication.! After use, clean equipment and store in a cool, dry, childproof area.# WARNING! Brake fluid will damage paintwork. Any spillage should be flushed with water immediately.# WARNING! Brake fluid is flammable - keep away from sources of ignition, including hot surfaces e.g. exhaust manifold.! Dispose of waste liquids in accordance with local authority regulations.# WARNING! DO NOT pollute the environment by allowing uncontrolled discharge of fluids.! Always read and comply with the warnings on the brake fluid container.! Wear eye protection and keep skin contact to a minimum. If brake fluid enters eyes rinse with plenty of water and seek medical advice. If swallowed seekmedical advice immediately.The VS401 vacuum tester and brake bleeding kit is a multi-function diagnostic tool used to test and identify faults on a variety of essential engine and associatedfunctions including fuel, ignition, transmission and emissions.Die-cast alloy body features large, easy-to-read vacuum gauge calibrated in both inches and millimetres of mercury.Set includes collection container for vacuum clutch and brake bleeding, bleed nipple connectors for car, commercial and motorcycle applications. Suitable forconducting general pressure and leakage tests on fuel and air conditioning lines and crank cases on 2-stroke auto and marine applications.1. SAFETY INSTRUCTIONS2. SPECIFICATION & CONTENTSVS401 - 1 - 061006INSTRUCTIONS FOR:VACUUM TESTERAND BRAKE BLEEDING KITMODEL : VS401Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you yearsof trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS, ANDCAUTIONS. USE THIS PRODUCT CORRECTLY, AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAYCAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.1. Vacuum pump with gauge2. Reservoir lid3. Reservoir jar4. 23î Vacuum Hose5. 3î Vacuum Hose6. Hose Adaptors7. Brake Bleed Nipple Adaptors8. Adaptor9. Hose Adaptor10. Universal Cup Adaptor11. Hose Adaptors12. Hose Adaptors13. Adaptor

/ 5

Related manuals for Sealey AUTO SERVICE VS401