Sealey APIC1800F Instructions Manual

InstructIons for:FULL HEIGHT INDUSTRIAL CABINETMoDEL no: APIC1800Fthank you for purchasing a sealey product. Manufactured to a high standard this product will, if used according to these instructions andproperly maintained, give you years of trouble free performance.1. SAFETY INSTRUCTIONSIMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSEDAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.2. INTRODUCTION3. CONTENTS1.1. GENERAL SAFETY WARNING! Ensure Health & safety, local authority, andgeneral workshop practice regulations are adhered to whenusing this cabinet. Locate cabinet in a suitable work area. Keep the work area clean, uncluttered and ensure there isadequate lighting. WARNING! use cabinet on level and solid ground,preferably concrete. Keep the cabinet clean and tidy in accordance with goodworkshop practice. Keep children and unauthorised persons away from the workarea. DO NOT use the cabinet for any purpose other than thatfor which it is designed. DO NOT use the cabinet outdoors. DO NOT place the cabinet in a damp or wet location or anarea where there is condensation. DO NOT clean the cabinet with any solvents which maydamage the surfaces or the protective coating. DO NOT move the cabinet when there are items placedinside. DO NOT overload the cabinet.Industrial quality, double door, free standing cabinet. Durable,scuff resistant design. reinforced steel doors with zinc platedlocking bars provide 3 point locking mechanism. supplied withtwo coded keys. Ideal for home, office, garage or workshop use.Dimensions:overall Width: 900mm, Depth: 450mm, Height: 1800mm.Internal Width: 850mm, Depth: 420mm, Height: 1710mm.unpack the contents of the box and check against theparts list/diagram. If there are any parts missing,contact your local sealey dealer.Part No. Part Name No. ofA1 rear Panel 1A2 rear Panel 1B1 Left side Panel 1B2 right side Panel 1c1 Left Door 1c2 right Door 1D top 1E Bottom 1f Inner face Plate 1G outer face Plate 1J Plastic stop 4K Locking Pin Locator 2L Hinge Pin Locator 4M screw 18n Hinge Pin 4Original Language Version APIc1800f Issue: 1 - 09/08/12© Jack sealey Limited

/ 3

Related manuals for Sealey APIC1800F