Sealey AK3984.V2 Instructions Manual

Also see for AK3984: Instructions

SHORT-ARM THREADED NUT RIVETERLONG-ARM THREADED NUT RIVETERMODEL NO: AK3984.V2 & AK3985.V2Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to theseinstructions, and properly maintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.1. SAFETY WARNING! Ensure Health & Safety, local authority and general workshop practice regulations are adhered to when using thisequipment.9 Familiarise yourself with the application and the limitations of the riveter, as well as the potential hazards.9 Maintain the riveter in good condition (use an authorised service agent).9 Replace or repair damaged parts. Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.9 Keep the work area clean, uncluttered and ensure there is adequate lighting.9 Keep the riveter clean for best and safest performance.9 Check moving parts alignment on a regular basis.8 DO NOT hold the workpiece by hand. Secure unstable workpiece with a clamp, vice or other adequate holding device.9 Ensure the workpiece is correctly secured before using the riveter.8 DO NOT use the riveter for any purpose other than that it was designed for.8 DO NOT operate the riveter if any parts are damaged or missing, as this may cause failure and/or personal injury.9 When not in use store in a safe, dry, childproof location. WARNING! Always wear approved eye or face protection when operating the riveter.2. INTRODUCTION2.1. AK3984.V2Suitable for rivet nuts in aluminium, steel and stainless steel. Short arms provide effortless functionality and access to restrictedspaces.2.2. AK3985.V2Suitable for rivet nuts in aluminium, steel and stainless steel. Long arms provide effortless functionality with adjustable stroke scalefor improved accuracy.3. SPECIFICATIONModel No:........................... AK3984 .............................. AK3985Length: ................................. 285mm ................................410mmIncludes: ......................................................................................M3 x 0.5 ..................................... Yes ......................................YesM4 x 0.7 ..................................... Yes ......................................YesM5 x 0.8 ..................................... Yes ......................................YesM6 x 1 ........................................ Yes ......................................YesM8 x 1.25 ................................... Yes ......................................YesM10 x 1.5 .....................................No ......................................YesM12 x 1.75mm .............................No ......................................YesRivet Types: .................................................................................Aluminium .................................. Yes ......................................YesSteel........................................... Yes ......................................YesStainless Steel ........................... Yes ......................................YesStructural .....................................No ....................................... NoAK3984.V2 AK3985.V2 Issue 2 (4) 07/01/2020Original Language Version© Jack Sealey LimitedRefer toinstructions

/ 2

Related manuals for Sealey AK3984