Sealey AK3984 Instructions Manual

Also see for AK3984: Instructions

INSTRUCTIONS FOR:LONG/SHORT ARM THREADED NUT RIVETERMODEL No:'s AK3984 & AK3985r WARNING! Ensure Health & Safety, local authority and general workshop practice regulations are adhered to when using this equipment.3 Familiarise yourself with the application and the limitations of the riveter, as well as the potential hazards.3 Maintain the riveter in good condition (use an authorised service agent).3 Replace or repair damaged parts. Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.3 Keep the work area clean, uncluttered and ensure there is adequate lighting.3 Keep the riveter clean for best and safest performance.3 Check moving parts alignment on a regular basis.7 DO NOT hold the workpiece by hand. Secure unstable workpiece with a clamp, vice or other adequate holding device.3 Ensure the workpiece is correctly secured before using the riveter.7 DO NOT use the riveter for any purpose other than that it was designed for.7 DO NOT operate the riveter if any parts are damaged or missing, as this may cause failure and/or personal injury.3 When not in use store in a safe, dry, childproof location.r WARNING! Always wear approved eye or face protection when operating the riveter.Original Language Version© Jack Sealey LimitedModel No: AK3984 AK3985Length:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285mm . . . . . . . . . . . . . . . . . . . .410mmRivet Nut Sizes:M3x0.5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes . . . . . . . . . . . . . . . . . . . . . . .YesM4x0.7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes . . . . . . . . . . . . . . . . . . . . . . .YesM5x0.8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes . . . . . . . . . . . . . . . . . . . . . . .YesM6x1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes . . . . . . . . . . . . . . . . . . . . . . .YesM8x1.25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes . . . . . . . . . . . . . . . . . . . . . . .YesM10x1.5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No . . . . . . . . . . . . . . . . . . . . . . .YesM12x1.75 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No . . . . . . . . . . . . . . . . . . . . . . .YesRivet Type:Aluminium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes . . . . . . . . . . . . . . . . . . . . . . .YesSteel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes . . . . . . . . . . . . . . . . . . . . . . .YesStainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes . . . . . . . . . . . . . . . . . . . . . . .YesBlind Rivets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No . . . . . . . . . . . . . . . . . . . . . . .NoStructural Rivets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No . . . . . . . . . . . . . . . . . . . . . . .NoFig.1 Fig.2AK3984 & AK3985 Issue No.2 - 12/06/14IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS USE THEPRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USEThank you for purchasing a Sealey product Manufactured to a high standard, this product will, if used according to theseinstructions, and properly maintained, give you years of trouble free performance1 SAFETY2 INTRODUCTION3 SPECIFICATIONSuitable for rivet nuts in aluminium, steel and stainless steel. Short arms (AK3984) provide effortless functionality and access in restricted spaces.Long arms (AK3985) provide effortless functionality with adjustable stroke scale for improved accuracy.

/ 3

Related manuals for Sealey AK3984