Sealey ADB100T Manual
PORTABLE ADBLUE TANK 12V - 100LTRMODEL NO: ADB100TThank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,and properly maintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.1. SAFETY WARNING: ADB100T must ONLY be used for AdBlue®.9 Place the tank on a flat surface before filling.9 Secure the tank to strong points with ratchet straps before transporting in or on a vehicle.9 Maintain the pump in good condition (use an authorised service agent).9 Replace or repair damaged parts. Use recommended parts only. Non authorised parts may be dangerous and will invalidate the warranty.9 Keep the pump clean for best and safest performance.9 Ensure the power supply (vehicle battery) corresponds with the requirements of the pump (12V DC).9 Disconnect from battery when not in use.9 Wear protective gloves, and protective clothing when working around liquids. A full range of personal safety equipment is available fromyour local Sealey stockist.9 Keep children and unauthorised persons away from the working area.8 DO NOT place the tank near any heat source.8 DO NOT start or stop the pump by connecting or disconnecting the battery clamps.8 DO NOT allow the unit to get wet.8 DO NOT operate the pump with wet hands.8 DO NOT use the pump where explosive or flammable vapours may be present.8 DO NOT tamper with the pump connections.2. i INTRODUCTIONManufactured from HDPE for the safe transportation and dispensing of Adblue® when supplying on site equipment. Supplied with a 12Velectric pump, 4mtr electric cable and clamps, and a 4mtr delivery hose and fuel nozzle. Can be safely secured and transported on anATV, pick-up truck or van using moulded grooves for tie-down straps and handles for positioning. Not suitable for petrol or diesel.3. i SPECIFICATIONModel ..................................................................... ADB100TCapacity ........................................................................ 100ltrFlow rate .................................................................. 20ltr/minPower............................................................................180WVoltage .............................................................................12VCurrent .............................................................................15ASize (W x D x H) .....................................900 x 500 x 480mmNett weight .................................................................. 12.5kgDuty cycle ............................................ 30mins on/30mins offADB100T Issue 1 28/11/18Original Language Version© Jack Sealey LimitedRefer toinstructionmanualWear protectivegloves Wear eyeprotection Wear protectiveclothing |
Related manuals for Sealey ADB100T
This manual is suitable for:
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved