Sanyo PLC-XC56 - 3100 Manual

Also see for PLC-XC56: Owner's manual Manual Owner's manual Dimensional drawing Command list

Contents

PLC-XC56 Expand Serial Command Functional Specifications44 / 659.4.13 CR_IMAGE CommandCommand “CR_IMAGE”[CR]DetailsGet image setting statusRequired data “CUSTOM1” to “CUSTOM4” is the same as “Image1” to “Image4”displayed when selecting IMAGE on OSD menuResponseAcceptable “000_%a”[CR]%a“DYNAMIC” --------------------------------------- Dynamic“STAND” ------------------------------------------- Standard“REAL” --------------------------------------------- Real“CINEMA” ----------------------------------------- Cinema“BLACKBOARD” -------------------------------- Blackboard“COLORBOARD” -------------------------------- Colorboard“CUSTOM1”~”CUSTOM4” -------------------- Image1~4Unacceptable “Error Code”[CR] ---- When the command is invalid due tocondition such as Input source9.4.14 CR_IMGGMD CommandCommand "CR_IMGGMD”[CR]Details Get Image Gamma setting statusResponseAcceptable “000_%a”[CR]%a“DYN” ------------ Dynamic“STD” ------------ Standard“REL” ------------ Real“CNM” ----------- Cinema“BKB” ------------ Blackboard“CLB” ------------ ColorboardUnacceptable “Error Code”[CR]