Sanyo PLC-XC56 - 3100 Manual

Also see for PLC-XC56: Owner's manual Manual Owner's manual Dimensional drawing Command list

Contents

PLC-XC56 Expand Serial Command Functional Specifications24 / 65“VIDEO” --------- Select Video InputWhen %1 is S-VIDEO“S-VIDEO” ------ Select S-Video InputDetails Select Input specified by %1 and also Source specified by %2 at onceThis command is available in normal Power ON status.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]8.6.8 CF_SYSTEM CommandCommand “CF_SYSTEM_%1”[CR]%1Input isComputer“VGA1” ------------- Select VGA1:“XGA1” ------------- Select XGA1:“WXGA3” ------------ Select WXGA3“1080I” --------------- Select 1080I“1035I” --------------- Select 1035I“720P” ---------------- Select 720P”575P” ---------------- Select 575P”480P” ---------------- Select 480P”575I” ----------------- Select 575I”480I” ----------------- Select 480I“MODE1”~ “MODE5”------------- Select Mode 1~Mode 5Input isPC-Digital/AV-HDCP”D-XGA1” --------------- Select D-XGA1::”D-WXGA3” ------------- Select D-WXGA3”D-1080I” ---------------- Select D-1080I”D-1035I” ---------------- Select D-1035I”D-720P” ---------------- Select D-720P”D-575P” ---------------- Select D-575P”D-480P” ---------------- Select D-480PInput isVideo“AUTO” -------------------------- Select System “Auto”“NTSC” -------------------------- Select NTSC“NTSC443” --------------------- Select NTSC4.43“PAL” ----------------------------- Select PAL“SECAM” ----------------------- Select SECAM“PAL-M” ------------------------- Select PAL-M“PAL-N” ------------------------- Select PAL-N“1080I” -------------------------- Select 1080i“1035I” -------------------------- Select 1035i“720P” --------------------------- Select 720p“575P” --------------------------- Select 575p“480P” --------------------------- Select 480p“575I” ---------------------------- Select 575i“480I” ---------------------------- Select 480iDetailsSelect System of currently selected InputWhen Input specified by %1 is inappropriate for selected Input, the projectorreturns “101”[CR] and the command is not executedThis command is available in normal Power ON status.Note1) “NTSC” / ”NTSC4.43” / ”PAL” / ”SECAM” / ”PAL-M” / ”PAL-N” is availableonly when Input is VIDEO / S-VIDEONote2) “1080I” / ”1035I” / ”720P” / ”575P” / ”480P” / “575I” / “480I” is available onlywhen Input is Y / Pb/Cb / Pr/CrResponse Acceptable “000”[CR]Unacceptable “Error Code”[CR]