Sanyo LNS-M01 Replacement Procedure

Contents

parts list

PARTS LISTFollowing parts are contained in the packing.· LENS· LENS MOUNTING SCREWS· DRIVER· LIGHT-BLOCK SHEETNOTES ON LENS INSTALLATIONLCD PROJECTOR LENSMODEL NO. LNS-M01LNS-S01Lens installation should be performed by the qualified service personnel.It should be followed by this procedure precisely.Before attempt to install the lens, confirm the model number (both the LCDprojector and the lens) and use the proper lens.If you have any questions, contact to the dealers.Following checks and confirmations should be taken for safety.Check the following things by the time of the cabinet assembly after thelens installation.1. Confirm the lens is securely fixed by 4 screws.2. Wiring must not be tangled in the gear of the lens motor or the othermechanical part.3. There is no missing part, or no loosing mounting part.1AA6P1P1980-- (ICPP)1 piece6 screws (2 for spare)1 piece1 sheetLENS REPLACEMENT ANDINSTALLATION PROCEDURE

/ 3

Related manuals for Sanyo LNS-M01