Sanyo DRW-1000 Instruction Manual

Also see for DRW-1000: Quick start guide

Contents

Basic RecordingBasic Recording from a TVFollow the instructions below to record a TV program.Recording starts immediately and continues until the disc ortape is full or you stop the recording.11 Switch on the VCR/DVD Recorder, select thedevice (VCR or DVD) for Recording and load arecordable disc or tape.Also make sure that the TV input is set to this VCR/DVDRecorder. If you load a completely blank DVD-RW disc,the Disc initialize menu will appear. Select a desiredRecording Mode to initialize the disc (See page 24).22 Set a recording mode as necessary by pressingREC MODE repeatedly.DVD: SP (Standard quality), LP (Low quality),XP(High quality)VCR: SP (Standard Play), SLP (Super Long Play)33 Use CHANNEL (v/V) on the front panel orCH/TRK(v/V) on the remote control to select theTV channel to record.44 Use AUDIO to select the audio channel torecord.The table below shows what will be recorded on the differ-ent settings for different types of broadcast. The last col-umn (Monitor Audio) shows what you’ll hear as it isrecording.• If you set the audio channel to SAP, but there is noSAP channel being broadcast, the main audio (mono orstereo) will be recorded.55 Press REC (z) once.Recording will start. (The REC indicator lights in thedisplay window.)z Recording continues until you press STOP (x) or thedisc (or tape) is full.z To record for a fixed length of time, see Instant TimerRecording on right.66 Press STOP (x) to stop recording.otez The maximun DVD recordings (titles) is 99.z If the VCR/DVD Recorder is powered off during DVDrecording, the recording will not be saved.Instant Timer RecordingInstant Timer Recording allows you to easily make arecording of a preset length without using the programtimer.11 Follow steps 1-4 as shown on the left (BasicRecording from a TV).22 Press REC (z) repeatedly to select the record-ing time length.Recording starts after the first press.DVD: Each subsequent press increases the recordingtime by 10 minutes (maximum 240 minutes) within freespace.VCR: Each subsequent press increases the recordingtime by 30 minutes (maximum 540 minutes). Please con-firm the VHS tape has enough remaining time to berecorded before recording.Instant Timer Record MenuChecking the Recording TimePress REC (z) or DISPLAY once to check the record-ing time. The recalled setting will automatically return tothe TV screen for a moment.To Extend the Recording TimeThe recording time can be extended anytime by press-ing REC (z).Each subsequent press increases the recording time by10 minutes (DVD) or 30 minutes (VCR), depending onfree space.To Pause the Recording1 Press PAUSE/STILL (X) to pause the disc duringrecording.2 When you want to continue recording, pressPAUSE/STILL (X) or REC (z).ote• If you press PAUSE/STILL (X) during the InstantTimer Recording, it will be canceled.• The VCR/DVD Recorder will automatically power offwhen the Instant Timer Recording ends.To record one TV program while watching another1 Press TV/VCR to select the TV mode during recording.The TV indicator appears.2 Using the TV, select the channel to be viewed.ips (VCR mode only)Always use PAUSE/STILL (X) for best results when makingchanges during recording.For example: To change channels during recording, first pressPAUSE/STILL (X) to put the VCR/DVD Recorder in pausemode, then select the desired channel on the VCR/DVDRecorder and press PAUSE/STILL (X) again to resumerecording.39RECORDINGTV Broadcast Selected Audio Broadcast Audio MonitorL Ch R Ch AudioMONO MONO MONO MONO MONOSTEREO STEREO L R STEREOLeft L L LeftRight R R RightMONO MONO MONO MONOMONO+SAP MONO MONO MONO MONOSAP SAP SAP SAPSTEREO+SAP STEREO L R STEREOSAP SAP SAP SAPMONO MONO MONO MONOVCR120min RecDVD00:09:0530min RecMONOInput: Ch. 600:17:32SPMONOInput: Ch. 602H 01M FreeSP