Sanyo DP19648 Owner's Manual

Also see for DP19648 - 19" LCD TV: Service manual

Contents

Sanyo DP19648 Owner's Manual Manual pdf 8 page image

8 Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032PC CONNECTIONSPC MONITOR OPERATIONPC P REPARATIONTo avoid an “Out of Range” condition, presetyour PC’s output resolution to an XGA value, suchas, 1024 x 768, before you disconnect it from yourregular monitor.PC M ONITOR SETUPThe Frequency, Resolution, Dot Clock, Phase,Horizontal Position, and Vertical Position are setautomatically when Auto Adjustment is selected.PC M ENU OPERATING TIPSPicture and Sound settings in the PC Menu do notaffect other input settings.Press RESET twice to reset ALL settings to factorydefaults. (See page 9.)MANUAL ADJUSTMENTSColor Temp.—Press ENTER to choose setting.Dot Clock—Dot Clock adjusts the Dot frequencyto match your computer’s dot frequency.Phase—Adjust the Phase when the pictureappears to flicker or is blurred.H–Position—Moves the image horizontally.V–Position—Moves the image vertically.Power Saving—When the HDTV no longer detectsH- and V-sync signals from the PC, it switches tostandby mode. It will return to normal operationwhen H- and V-sync signals are again detected.Reset PC Settings—Resets all the PC Menuoptions to Factory default values.NOTE: Before connecting any cables, disconnectthe AC Power Cords of both the HDTV andPersonal Computer from the AC outlets.1 Connect an RGB cable from the monitor out-put on your PC to the RGB connector on theHDTV and tighten the screws. (Monitor Cablenot supplied.)2 Insert one end of a Stereo Mini-Audio cableinto the PC Audio Out jack and the other endinto the HDTV PC Audio Input jack. (StereoMini-Audio Cable not supplied.)HINT: Volume can be adjusted both from the PC andthe HDTV VOLUME and keys.3 Select Auto Adjustment from the PC SetupMenu.NOTE: Power on the HDTV and any other periph-eral equipment before powering on the computer.PC MENU NAVIGATION MAP