Sanyo DMP-P7 Instruction Manual

Contents

specifications

8Setting Alarm TimeThe unit can set two Alarm Time.Press and hold the ALARM 1 Button or ALARM 2 Button until the display flashes. Press the SKIPFORWARD or BACKWARD Button until the desired alarm time is displayed. Remember to set the correctAM or PM (an icon to the right of the time display is the PM indicator).Press the WAKE Button to select the iPod, radio or alarm buzzer hi or low to wake to.A corresponding Wake Icon will light up for the selected Wake sound.To select Buzzer Hi or LowPress and hold ALARM 1 or ALARM 2 Button until clock display flashing, press ALARM 1 or ALARM 2Button again. Then select AL-L or AL-H by pressing SKIP or repeatedly.Press the ALARM 1 Button or ALARM 2 Button again to exit the setting mode. The alarm time and waketo mode are set.1.3.4.Note: Once you set the alarm time, the alarm will be automatically armed. The Alarm Icon and Wake Icon willappear to indicate the alarm is armed.Note: Make sure to adjust volume level for comfortable wake up volume.2.Setting Clock Time and Calendar1.2.3.4.Press and hold the CLOCK Button located on the back of the unit until 12H or 24H appeared. Select yourdesired clock display either 12 hour or 24 hour by pressing SKIP FORWARD or BACKWARD Buttonrepeatedly. Then press the CLOCK Button again to confirm 12H or 24H mode setting.The clock display at the centre will flash. Press the SKIP FORWARD or BACKWARD Button to set thecurrent time, then press the CLOCK Button again to confirm clock setting. (Note: if the system is set to 12-hour mode, if it’s afternoon, the PM indicator will be lighted on.)The year display at the lower right will flash. Press the CLOCK Button to accept the current setting, or pressthe SKIP FORWARD or BACKWARD Button until current year is displayed. Press the CLOCK Button toconfirm year setting.The date display at the lower right will flash. Press the CLOCK Button to accept the current setting or pressthe SKIP FORWARD or BACKWARD Button until current date is displayed. Press the CLOCK Button toconfirm date setting.Setting Up the Clock Radio