Sanyo DMP-P7 Instruction Manual

Contents

specifications

If you are using an iPod without a docking port or other MP3 player or other portable audio device, you can stillplay it through the clock radio via the AUX IN Jack.NOTE: To use the AUX IN Jack, make sure no iPod is docked in the clock radio.Plug one end of the audio connecting cable into the AUX OUT Jack on your device and the other end of theconnecting cable into the clock radio AUX IN Jack, located on the back of the unit.Press the PLAY/PAUSE Button on the clock radio (or PLAY/PAUSE Button on the remote control). TheAUX Icon will appear, indicating AUX playing mode.Turn on and play your device.Press the VOLUME UP or DOWN on the clock radio (or Volume+ and Volume- Button on the remotecontrol) to adjust the system volume. You may need to adjust your device volume, too.To turn off the unit, press the POWER Button (or POWER ON/OFF Button on the remote control). Pleaseremember to turn off your device, too.1.2.3.4.5.Note: Extend FM wire antenna fully for best FM reception (do not strip, alter or attach to other antennas). TheAM loop antenna should be placed up to 12" away from the unit for best reception. Rotate the AM loop antennaas required for best AM reception.Listening to a non-docking iPod or other portable audio devicesListening to Radio10Press the BAND/RADIO Button on the clock radio to play the radio. The radio frequency appears at thelower of the display. Press the BAND/RADIO Button on the clock radio repeatedly to select AM or FM band.Press the SKIP FORWARD or BACKWARD Button on the clock radio (or or Button on the remotecontrol) to tune in the desired station. Press the or Button on the remote control again to Autoscan to the next clear station. Hold for seek mode.Press the ST/MONO Button (or ST/MONO on the remote control) to ST/MONO switches the receiverbetween FM stereo and mono modes. Mono reduces the noise heard when listening to weak FM stations.Press the VOLUME UP or DOWN Button on the clock radio (or Volume+ and Volume- Button on theremote control) to adjust the system volume.Press the MUTE Button on the remote control to turn OFF the sound. Press the MUTE Button again orVolume +/- buttons on Handset to restore the sound.To turn off the unit, press the POWER Button (or POWER ON/OFF Button on the remote control) to turn itoff.1.2.3.4.5.6.