Sanyo AVM-32F4 Instruction Manual

Also see for AVM-32F4, AVM32F9: Instruction manual

Contents

1716SET-UPLNA (Low Noise Amplifier) EFFECTSSet LNA ON to increase a weak incoming signal. However, if you are located in a strong signalarea, such as nearby a broadcasting station, and if the picture is distorted, set LNA OFF.1. Press CH / buttons or use the number buttons to select a channel you want to adjust.2. Press MENU button, move the cursor to "SETUP" option and press VOL + button. The "SETUP" menu is displayed.3. Press CH / buttons to place the cursor on the "LNA" option.4. Press the VOL+ button.Whenever this button is pressed, the mode will change as follows.SETUPANTENNA : CATV2AUTO PROGRAMFINE TUNE : 0LNA : OFF: SEL. + : SET : PREV.MENUPICTURESOUNDTIMESETUPFUNCTIONLANGUAGE : ENGLISH: SEL. + : ENTER : EXITSETUPANTENNA : CATV2AUTO PROGRAMFINE TUNE : 0LNA : OFF: SEL. + : SET : PREV.SETUPANTENNA : CATV2AUTO PROGRAMFINE TUNE : 0LNA : ON: SEL. + : SET : PREV.SET-UPFINE TUNINGIf the reception is clear, you do not have to fine-tune the channel, because this is doneautomatically during auto program and manual memory.If, however, the signal is weak or distorted, you may have to fine-tune the channel manually.1. Press CH / buttons or use the number buttons to select a channel you want to adjust.2. Press MENU button, move the cursor to "SETUP" option and press VOL + button. The "SETUP" menu is displayed.3. Press CH / buttons to place the cursor on the "FINE TUNE" option.4. Use VOL + / - buttons until you obtain a sharp and clear picture and good sound quality.5. If you wish to memorize the fine-tuned frequency for the channel, press ADD/DEL button. The[ ] symbol (red color) appears to the right of the channel number. To delete the memory,press the same button again. The [ ] symbol disappears.NOTES The AFT (Automatic Fine Tuning) mode does not operate on the channels that arefine-tuned.After the Auto Channel Programming has been performed, memorized channelsare automatically tuned to their optimum frequencies.SETUPANTENNA : CATV2AUTO PROGRAMFINE TUNE : 0LNA : ONA/D: MEMORY: SEL. : ADJ : PREV.MENUPICTURESOUNDTIMESET UPFUNCTIONLANGUAGE : ENGLISH: SEL. + : ENTER : EXITSETUPANTENNA : CATV2AUTO PROGRAMFINE TUNE : 0LNA : ONA/D: MEMORY: SEL. : ADJ : PREV.SETUPANTENNA : CATV2AUTO PROGRAMFINE TUNE : +2LNA : ONA/D: MEMORY: SEL. + : ADJ : PREV.All manuals and user guides at all-guides.com