Sanyo AVM-32F4 Instruction Manual

Also see for AVM-32F4, AVM32F9: Instruction manual

Contents

2726SOUND ADJUSTMENTMTSUSING SOUND MENU :Press the MENU button. Move thecursor to SOUND by pressing the CH/ buttons and press the VOL +button.Move the cursor to MTS by pressing theCH / buttons.Press the VOL + button.Whenever this button is pressed, the mode will change as follows.111122223333STEREO SAP MONOMENUPICTURESOUNDTIMESETUPFUNCTIONLANGUAGE : ENGLISH: SEL. + : ENTER : EXITSOUNDSOUND : STANDARDEQUALIZERHEADPHONEBALANCE : 0SURROUND : OFFMTS : STEREO: SEL. + : SET : PREV.SOUNDSOUND : STANDARDEQUALIZERHEADPHONEBALANCE : 0SURROUND : OFFMTS : STEREO: SEL. + : SET : PREV.SOUNDSOUND : STANDARDEQUALIZERHEADPHONEBALANCE : 0SURROUND : OFFMTS : SAP: SEL. + : SET : PREV.SOUND ADJUSTMENTMTSUSING MTS BUTTON :Your TV set incorporates an MTS (Multichannel Television Sound) decoder to receive stereobroadcasts and any accompanying SAP (Second Audio Program) such as another languagesound track).1. Press the MTS buttonDepending on the audio signal type of the currently receiving broadcast, on-screen selectionappears as follows:The " ", " " symbols indicate that MTS mode is being broadcast.STEREO symbol (RED color)SAP symbol (RED color)When the power is switched on or channel is changed, the " ", " " symbols areautomatically displayed, depending on the currentbroadcast.NOTESIf the received signal is weak, noise may be heard.In such a case, press MTS button to set to the MONO mode for better sound reception.If the received SAP signal is weak, the SAP will not be heard.Even if both STEREO and SAP broadcasts are received, both broadcasts cannot beheard at the same time.Transmission of CABLE TV signals may differ from off-air TV broadcasts.TV 2STEREO SAP MONOStereo and SAPStereo or SAPMonoSTEREO MONO/SAP MONOReceiving signal On-screen selectionsMONO onlyAll manuals and user guides at all-guides.com