Sanyo AVL472 Instruction Manual

Also see for AVL472: Instruction manual

PreparationsRemoving the StandLoosen the screws on theStand to remove the Stand.! Do not remove the stand from the Display unless using an optional bracket to mount it.! The appearance of the unit may differ from the actual one.! To attach the stand, perform the steps in reverse order.Cautions:1. Carefully handle the unit during setup and consult authorized service personnel to ensure successfulinstallation.2. Before performing work spread cushioning over the base area to lay the Display on. This will prevent it frombeing damaged.3. Disconnect the AC power cord firstly.ScrewsStandNote6ScrewsStand(For model AVP4232/AVP504)(For model AVL472)(if wall mounting)Loosen the screws on theStand to remove the Stand.