Samyung N560 User Manual

Also see for N560: Installation and operation manual

Contents

Samyung N560 User Manual Manual pdf 12 page image

Installation and Operation Manual122-1 Mounting the UnitThe chart plotter is supplied with bracket and flush mounting kit. You can choose a method ofinstallation according to your preference.2-1-1 Bracket MountingBefore installing ensure the area the bracket is mounted to is strong enough to support theweight of the GPS chart plotter. After the location is found, attach the mounting base to thearea using the supplied hardware.Mounting the display Unit:1 Hold the display unit and find a groovejoint between the display unit and bracket.2 Gently push the display unit into thegroove of bracket and turn the knob toclockwise to lockRemoving the display unit:1 Turn the unit off2 Turn the knob to counter clockwise3 Pull the display unit out.NoteThe chart plotter with internal GPS antenna isdesigned to be bracket mounting and flush mounting.However, if you flush mount inside of your boat, GPSperformance can be reduced.2-1-2 Flush Mounting1 Find a location for flush mounting.2 Drill a hole in the area of the cutout areafor the blade of jig saw.3 insert and cut out the area on the panelusing the jig saw4 Drill four holes for mounting studs.5 Install the mounting studs on the chartplotter and insert them into the mountinghole.6 Attach the chart plotter to the mountinglocation by attaching the supplied hardwareto the mounting studs.Note1 If you flush mount, you need the optional externalGPS antenna.2 Before Drilling holes make sure there is enoughspace to mount the chart plotter there is noobstructions.2 Getting Started