Samsung YP-N1 User Manual

Contents

INSTALLING THE DEVICE ONTO YOUR VEHICLEBefore you start - Select a position to install the cradle that will not block driver’sfield of vision and clean the place before installation.1. Attach the suction cup to the place you selectedcompletely and push the locking tab in thedirection of the arrow shown by the figure.The suction cup is secured.2. Insert the catches of the stand to the CradleFixing Grooves and slide the cradle so thatthe catches are in the CLOSE position.3. Insert the main unit into the cradle.Put the main body into the cradle until it clicksat the both side of the fixing parts in order tosecure the installation.4. Adjust the angle of the support to facilitateyour visibility.Release the adjustment screw 1 counterclockwiseslightly and adjust the angle between the 180degrees in vertical and 360 degrees in horizontal. Ifyou find a comfortable angle, fasten the adjustmentscrew 1 by turning it clockwise.Release the adjustment screw 2counterclockwise slightly and adjust theangle between the 180 degrees in horizontal.If you find a comfortable angle, fasten theadjustment screw 2 by turning it clockwise.the basics _ 1701 THE BASICS