Samsung YH-820 User Manual

Also see for YH-820: User manual Manual Specifications Quick start guide Service manual

61ENGRecording Settings60Contrast SettingsIn the Menu, use the SCROLL UP/SCROLL DOWN buttons to select Settings,and then press the SELECT button.1Use the SCROLL UP/SCROLL DOWN buttons to select Contrast.2Press the SELECT button until the desired screencontrast appears. The setting range of the contrast, which adjusts the contrast ofthe screen, is 0 to 4.3 SRS settingsRecord SettingsBacklight-3secContrast-2SettingsIn the Menu, use the SCROLL UP/SCROLL DOWN buttons to select Settings,and then press the SELECT button.1 Use the SCROLL UP/SCROLL DOWN buttons to select P.saver screen.2 Press the SELECT button until the desired screenpower save time appears. Off 15 sec 30 sec 45 sec 1 min If the selected time elapses while playing music, the screenswitches to power save mode. In power save mode, themusic continues to play but the music information is notdisplayed on the screen. Press the √» button in power save mode to return to thenormal playback screen.3 Record SettingsBacklight-3secContrast-2P.Saver-3secSettingsPower Save Screen SettingsIn the Menu, use the SCROLL UP/SCROLL DOWN buttons to select Settings,and then press the SELECT button.1 Use the SCROLL UP/SCROLL DOWN buttons to select Backlight.2 Press the SELECT button until the desiredBacklight On-Time appears. Off, 3, 5, 10, 15, 30seconds and Always are available forBacklight-On Time.3 EQ-OffSRS settingsRecord SettingsBacklight-3secSettingsIn the Menu, use the SCROLL UP/SCROLL DOWN buttons to select Settings,and then press the SELECT button.1 Use the SCROLL UP/SCROLL DOWN buttons to select Record Settings,and then press the SELECT button.2 Use the SCROLL UP/SCROLL DOWN buttons to select Sampling and Bit Rate,andthen briefly press the SELECT button to make the desired recording setting. Complete the desired setting, and then press the MENU button to go to the main menu. Sampling: Each time the Select button is pressed, the selection toggles between 32KHzand 44KHz. Bit Rate: Each time the Select button is pressed, the selection changes as follows:96 ➔ 128 ➔ 160Kbps. Selecting a higher bit rate results in better quality sound, but uses more memory space.3EQ-OffSRS settingsRecord SettingsSampling-44khzBit Rate-128kbpsRecord SettingsSettings NNNN oooo tttt eeee- Voice can be recorded only at8KHz 32kbps.Repeat-OffBacklight Settings✍YH820‡»` AME 12/31/04 10:43 AM Page 60