Samsung V32F390FE Series User Manual

Also see for 3 SERIES: User manual User manual User manual Quick setup guide User manual

Memorising ChannelsAerialMENU → Broadcasting → AerialBefore your product can memorised the available channels, you must select your Product signal source, Terrestrial(using an aerial) or Cable. Select Terrestrial or Cable. After you have selected the signal source, go on to the AutoTuning function." Selecting the signal source using the Aerial function also determines the signal source the product is tuned to. Forexample, if you receive your product signal over the aerial, and you select Cable, you will see only snow. You mustselect Terrestrial to see a picture.Auto TuningMENU → Broadcasting → Auto TuningAutomatically scans and indexes all channels received through the TV's aerial input connector.To start, navigate to Broadcasting and select Auto Tuning.Select Start when prompted with a message. This initiates the Auto Tuning function. The process can take up to 30minutes to complete. If Starting the Auto Tuning function when there is an existing index of channels overwrites theprevious index.● Auto TuningScans for channels automatically and stores them in the TV’s memory.● Cable Search Option (when the aerial was set to Cable) (Depending on the country)Sets additional search options such as the frequency and symbol rate for a cable network search.● Standby Auto TuningAuto-tune channels while your TV is in standby mode." This function is not available on certain models in specific geographical areas.● Wake-up TimerSchedule timer to turn the TV on and scan channels automatically.Country (Area)MENU → Broadcasting → Channel Settings → Country (Area)Select your country so that the product can correctly auto-tune the broadcasting channels." The PIN input screen appears. Enter your 4 digit PIN number.● Digital Channel: Change the country for digital channels.● Analogue Channel: Change the country for analogue channels.English - 41Basic Features