How to connect and remove a driveHow to connect the External DVD WriterChecking the USB 2.0Switch off the PC power.Connect the other end of USB cable with theUSB port of PC.Connect a cable and switch on the drivepower.● Connect a USB cable with the USB port of drive.● Connect an AC power cord with an AC/DC adapter.● After connecting an AC/DC adapter cord with the power portof drive, connect the power plug of AC/DC adapter with anAC power socket.● Connect it to the drive port.If a PC which is not supported USB 2.0 uses this drive in the speed of USB2.0, it should install USB.20adapter card. If not, this drive operates normally by USB 1.1 connection but it is limited in the speed of USB1.1. You can check if USB 2.0 adapter card is recognized in the PC being installed USB 2.0 adapter card.Windows 2000/XP/VistaSelect a property by clicking the right button of mouth attribute in my computer, and then click to confirm thehardware tap and device manager in order. Contact with a card manufacturer or a manufacturer if there is ayellow exclamation mark at the side of general purpose series bus controller.123How to connect a device for theuse of TruDirect programConnect Video/Audio device to the computer before the use of TruDirect program.Camcoder, Digital Camera, Webcam...IEEE 1394USBComposite➡Make a DVD from the live video, photo file, and video file.Press the TruDirect function button at the front of product(In the high speed mode), or clickthe TruDirect shortcuts at the window background.Play a DVD which is made by TruDirect with a DVD player or a PC.12347 8SE-S204S-ENG(외장형).indd 10-11SE-S204S-ENG(외장형).indd 10-11 2007-10-30 오후 1:29:092007-10-30 오후 1:29:09