Samsung SVP-5300 User Manual

Also see for SVP-5300: Quick start guide

Contents

17Adjusting BrightnessPreset buttonAdjusting Sharpness/Automatic FocusWhen the Auto focusing may not work properlyObject in a dark areaThe background is too brightWhen some objects being close to the lens and othersbeing far away at the same time.Object with little difference in brightness such as wallor airRepeated horizontal or vertical lines.Object standing behind the window is stained withspot or water dropObject reflecting a strong beamWhen the wire net or screen close to lens is piled upto the object in a distancePress [Bright +] or [Bright -] on remote controller or[Iris +] or [Iris -] on the control panel.Bright (Iris) + : When the image of object is darkBright (Iris) - : When the image of object is brightUsed to save the current status (Zoom, Focus, Lamp,Color etc).When you use the video presenter on another place,you need not to repeat the same procedures but thesaved status will be automatically set only bypressing the “Active” button.Select the button (1~4) and press it within 4 secondsafter pressing “Save/Active” button.The operating range of remote controllerIf the distance to object is out of range or if thelens is not attached properly, auto focusing maynot work. At this time, check it again.Focusing distance with adapter lens attached :24~32cmFocusing distance without adapter lens: 80cm~Automatic focusingPress the [AF] button on the remote controlleror [AF] button on the control panel.Manual focusingPress the [Focus N/F] button on the remotecontrol or [Focus +/-] button on the controlpanel.If you press [+] button the image gets sharper,and [-] button the image gets duller.16OPERATIONAdjusting ColorImage Reverse and Image FreezeZoomingVolume ButtonUse this button to adjust the volume ofmicrophone (if connected with video presenter).If you press [AWC] button, color will beadjusted automatically. To obtain the bestresult, put the camera lens facing white paperand press [AWC] button.If you want to fine adjust, press [RED+/-] or[BLUE+/-] button. Press [RED+/-] button toadjust the red factor strongly, and [BLUE+/-]button to adjust the blue factor strongly.The color level will be displayed on the screen.Press [Wide] or [Tele] button on the remotecontroller or [zoom+] or [zoom-] on the controlpanel.Image reversePress [Reverse] button to make the image reverse.mirror → flip → flip + mirror → normal[(reverse right/left)→ (reverse up/down)→(reverse right/left and up/down)→ (normal)]Image freezeWhen you press [Freeze] button, the image is heldon the screen. It is convenient to replace the scriptor picture with next one.If you press [Freeze] button again, the freezingmode will be released.▲ Tele (Zoom +)▲ Wide (Zoom -)