Common Problems 21Question: Can I install multiple conduit applications likePocketMirror, Intellisync, etc?Answer: No. More than one conduit can cause systemlockups and other problems. Select one preferred conduitapplication and install. If you decide later that you wouldlike a different conduit application, remove the PalmDesktop application and delete all the subdirectories, thenreinstall along with the desired conduit application.Using your i330 with the Sprint BusinessConnection Palm Client1. If you boot your system up with the i330 cradle connectedAND an active BizConn sync in progress, you may beintermittently left in a state in which BOTH the com portsettings in HotSync and the system Device Manager arecorrect but nothing happens when you press the HotSyncbutton.Resolution: Remove the handset from the cradle, rebootthe system; do not put handset in cradle during the bootprocess.2. Intermittently, if you plug in the USB cable from the cradleinto a booted system while the BizConn client is activelysyncing, the device may not be properly recognized andregister as a yellow-banged USB device in the Device Mgr.Attempts to manually reinstall the driver fail.Resolutions: a.) Remove the handset from the cradle, plugthe USB cable into a different port and replace thehandset. It will pick up / install the device at a differentcom port address; or if you DO NOT have multiple USBports available, go to “b.”.b.) Un-install yellow-banged device, unplug the USB