setup & application18_ setup & applicationSetting the maskYou can mask a portion or the whole of the screen so that it is hidden.1. From the menu, select imAGe ADJuSTmenT mASK SeTup.2. Select mASK SeTup to display the sub menu items.• BOUNDS : With BOUNDS, select the display device currently using.Press [►] button to select BOUNDS mode in the order of C-VIDEO>.• TONE : Select a tone level.Each time you press [►], the tone value will switch to . The lower the level is, thegreater the transparency of the masking area becomes.• WIDTH : Select a mask width.Press [◄] or [►] button on the control panel to set the area between 1~100.• HEIGHT : Select a mask height.Press [◄] or [►] button on the control panel to set the area between 1~100.M ` When the mask setting is completed, press the button on the control panel to activate it. Use the left/right buttons to move the masking area.` Note that the mask WIDTH/HEIGHT value is not absolute value but relative and proportional to the width/height of thevideo in applicable aspect ratio, which will differ from resolution setting.mASK SeTup menuBOUNDS VGA/USBTONE LEVEL 4WIDTH ··· * ··· ··· ··· 25HEIGHT ··· * ··· ··· ··· 25RETURN }
