Samsung SCU-2370 User Manual

Also see for SCU-2370: Specifications User manual Specifications User manual User manual

26_ setupsetupCAMERA SETTINGÚ The camera setting section in this manual is explained based on SCU-2370. For SCU-9051/SCU-VAC, referto the applicable user manual.Focus and Zoom SettingsFocus ModeAUTO : Performs continuous auto-focus.MANUAL : Changes the camera mode to Manual Focus.ONE SHOT : Auto-focuses the camera once after the Pan,Tilt, or Zoom function is used.Digital ZoomEnables the maximum digital zoom.Digital zoom magnifies from x2 to x16, which provides withzooming up to x592 in maximum when applied with the opticalzoom.Unlike the optical zoom, the graphics quality of the digital zoom decreasesas its zoom ratio increases.The auto-focus function may not operate normally under the followingconditions :When background illumination is lowWhile Slow-Shutter is in operationIf the zoom level is set too highWhen background illumination is too highIf a long distance object and a close distance object appear togetherwithin a monitoring areaIf there is no contrast, e.g. the sky or a wallIf the camera is facing a thin horizontal lineAuto Focus focuses on an object in the center of the screen; objects around thescreen edges may not be properly in focus.z---zM -------Camera Setting▶Focus & ZoomWhite Balance ATWExposureBack Light OFFAGC MEDIUMSSNR MEDIUMSSDRDay & NightOthersÆMain Menu▶Camera SettingSequence SettingP/T SettingOSD SettingAlarm SettingInitializeStatusÆFocus & Zoom▶Focus Mode ONE SHOTZoom TrackingDigital Zoom OFF