Menu
Samsung SCP-3371/SCP-3371H User Manual
                                                                                            |
English - 29● CONNECTION & INSTALLATIONPREPARING ADAPTER AND CABLESPower AdapterPower adapter has the capacity of AC24V 2.5A.After connecting the power cable by separating the power connector from the terminal, make the connection betweenterminal and connector by using a bolt.Video CableThe camera’s video output port is connected to the monitor with a BNC coaxial cable, shown below :If the distance between the camera and the monitor exceeds the recommended maximum, please usean auxiliary video amp.If the camera is controlled through coaxial communication, please use a video amp intended for coaxial communications.Regular video amps do not transfer coaxial signals.Communications CableFor the camera to communicate with the controller, aRS-485/422 communications line is required. To ensure thequality of long distance communication and the accuracy of theoverall communication it is recommended using a twisted paircable such as UTP.Depending on the camera’s environment, the communications distance may vary.Neither the video nor communications cable is enclosed with the camera.yM yM yM Distance Recommended CableSpecification300m 4C2V(RG-59/U)450m 5C2V(RG-6/U)600m 7C2V(RG-11/U) |
Related manuals for Samsung SCP-2271/SCP-2271H
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved