ENGLISH54Playing back a TapeNotes: SCL901/L906/L907 feature a monaural audio system. If your TV or VCR features a stereo audio system, connect the audiocable to input “L” of your TV or VCR. You can use an S-VIDEO cable to obtain better quality of pictures if you have a S-VIDEO connector on your TV. While playing back on a TV screen, close the LCD panel. Otherwise, picture distortion may occur.Playback1. Use the TV/VIDEO button to select VIDEO on your TV.2. Connect power source (battery or AC Power Adapter) to the camcorder.Set the power switch to PLAYER mode.3. Insert a tape you want to see. Make sure that STOP is displayed.4. Press the (PLAY/STILL) button. The picture you recorded appears on the TV after 2 to 3 seconds. Press (STOP) to stop playing. If the tape reaches its end during playback, the tape will rewind automatically.Notes: Vibration from the built-in speaker can cause picture distortion. It is best to turn the built-in speaker off when your camcorder is connected to the TV. The system (Hi8/8mm) is selected automatically, depending on the tape format. This camcorder does not support LP recording and playback.PLAYERPLAY/STILL00732M SCL901 SEA (46-71) 12/26/03 10:46 AM Page 54
