ENGLISH42Advanced RecordingSetting and Recording the DATE/TIME✤ Setting and recording the date/time feature works in the CAMERA mode only.✤ You can record the date/time on your tapes, so you will know when it was made. The date and time are recorded whenever they aredisplayed on the viewfinder or LCD.Setting a DATE/TIME✤ Setting the DATE/TIME is possible in STANDBY of CAMERA mode only.1. Make sure that you have installed the LITHIUM BATTERY. (see page 17)The LITHIUM BATTERY is needed to maintain the clock.2. Set the power switch to CAMERA mode. (see page 18)3. Press the MENU ON/OFF button, then the MENU list will appear.4. Turn the UP/DOWN dial until CLOCK SET is highlighted.5. Press ENTER. CLOCK SETTING is possible when the DATE and TIME appear. BLINKING indicates the possible changes for the setting.The year will be the first to blink.6. Turn the UP/DOWN dial to set the desired year.CLOCK SETTING12:00 AMJAN. 1, 2004EXIT: MENUCLOCK SETTING12:00 AMJAN. 1, 2005EXIT: MENUMENULCD ADJUSTDIS........................OFFD.ZOOM ..............OFFWHITE BAL ..........AUTODISPLAY ..............ONLANGUAGE..........ENGLISHWL REMOCON ....ONNEXT: MENUMENUCUSTOM SETCLOCK SETTITLE SETTITLE ....................OFFD/TITLE COLOR ..WHITEC.RESET ..............0:00:00DEMO ..................OFFNEXT: MENU00732M SCL901 SEA (20-45) 12/26/03 10:45 AM Page 42
