Rev. : 1.0 P.1911. KVM SessionInstallation StepsBefore installation, please make sure all of peripherals and computers havebeen turned off.1. Connect the 3-in-1 cable with 2 mini-din 6-pin connectors and aHDDB 15-pin connector to the computer ports.2. Connect another end of the cable to KVM switch.3. Plug the power adapter included to the LCD Keyboard Drawer.4. After powering on computers and finishing the boot-up process, youcan start LCD keyboard drawer with PS/2 KVM switch.Note: Please don’t switch the PC port (i.e. Don’t press the push button ofKVM switch or run hot key) during the computers are underboot-up.PCCD-6 3-in-1 cableDCAdapterRKP2415 / RKP2417 / RKP2419 User Manual