Menu
Samsung RKP2415-1601 User Manual
                              | |
Rev. : 1.0 P.1510. LCD SessionResolution SettingsFor SUN Servers● Resolution configuration procedures should be run by qualified SUNserver administrator● Sun Servers are using resolution at 1152 x 900 x 76Hz.● Supported resolution mode for 15” LCD:● 1024 x 768 x 70/75Hz● Supported resolution mode for 17” LCD:● 1280 x 1024 x 75Hz● You need to change the Sun Server resolution before you connect toLCD Display.● Please do the following procedures to change the resolution settings :1. As root:You may find the following comment “/user/sbin/m64config”.2. To view current resolution:Type “/user/sbin/m64config – prconf”.3. To change to 1024x768 @ 70MHz:Type “/user/sbin/m64config – res 1024x768x70 now”.4. The screen will be rubbish.5. Then type “pkill Xsun”.And Type “pkill Xsession” to restart the Xsession.● Under Common Desktop Environment (CDE).● To change the OpenBoot resolution, you can type the followingcommand in OK prompt.1. In OK prompt, type “setenv output-device screen:r1024x768x70”.2. Type “printenv” to confirm the resolution has been changedto 1024x768x70Hz.3. Then type, “reset” to restart the system.Note : Remember to RESTART the server after these processes.Note : Remember to RESTART the server after these processesRKP2415 / RKP2417 / RKP2419 User Manual |
Related manuals for Samsung RKP2415- 801
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved