ADJUSTING THE FREEZER DRAWER LEVELAdjustment partfffFreezer Drawer1. Locate the height-adjuster (1_}) in the freezer drawer.Unscrew the four Phillips screws (_) slightly to loosen the door.2. Loosen the controller screw(G ) with a Phillipsscrewdriver.3. Find the best level to align the door slope.J@ Example) The slope is about 2ram (0.08inch) as shown below.Slope !_Reference _,_plane- Rotate the Height Adjuster to +2.0 to reduce the doorslope.-,_ After adjustment, first tighten screw ((_) and then screw ((_).Settisg Up 15