Samsung QR Series Quick Setup Manual

Also see for QB98R: User manual User manual User manual User manual Manual

Quick Setup GuideQB98R* The colour and the appearance may differ depending on the product, and the content inthe manual is subject to change without prior notice to improve the performance.* Download the user manual from the website for further details.http://www.samsung.com/displaysolutionsBN68-09716D-001 Connects to MDC using a LAN cable. (10/100 Mbps)2 Connect to a USB memory device.* The USB ports on the product accept a maximum constantcurrent of 1.0A. If the maximum value is exceeded, USB portsmay not work.3 DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable.MAGICINFO IN: Connects to a network box using DP-DVI cable touse Magicinfo.4 Connects to MDC using an RS232C adapter.5 Connects to MDC using an RS232C adapter.6 Receives sound from a source device via an audio cable.7 Connects to a source device using a HDMI cable or HDMI-DVI cable.8 Connects to a source device using a HDMI cable or HDMI-DVI cable.Connects to another product using a HDMI cable.9 Connects to a PC using a DP cable.0 Connects to another product using a HDMI cable.! Connect to a USB memory device.* The USB ports on the product accept a maximum constantcurrent of 0.5A. If the maximum value is exceeded, USB portsmay not work.@ Outputs sound to an audio device via an audio cable.# Connects to an external IR cable that receives signals from theremote control.Checking the ComponentsPortsIssues SolutionsThe screen keepsswitching on and off.Check that the cable between the productand the PC is connected correctly.No Signal isdisplayed on thescreen.Check that the product is connectedcorrectly with a cable.Check that the source device connected tothe product is powered on.Depending on the type of external device,the screen may not display properly. In thiscase, connect it with the HDMI Hot Plugfunction turned On.Not Optimum Modeis displayed.This message is displayed when a signalfrom the graphics card exceeds the product’smaximum resolution and frequency.Refer to the Standard Signal Mode Tableand set the maximum resolution andfrequency according to the productspecifications.The images onthe screen lookdistorted.Check the cable connection to the product.The screen appearsunstable and shaky. Check that the resolution and frequency ofthe PC and graphics card are set within arange compatible with the product. Then,change the screen settings if required byreferring to ‘Preset Timing Modes’.There are shadows orghost images left onthe screen.Troubleshooting GuideContact the vendor where you purchased the product if anycomponents are missing.The pictures may look different from the actual components.Quick Setup GuideWarranty card(Not available insome locations)Power cordBatteries (AAA x 2)(Not available insome locations)Remote Control RS232C(IN) adapterHOLDER-CABLEPartsThe terms HDMI and HDMI High-Definition Multimedia Interface,and the HDMI Logo are trademarks or registered trademarks ofHDMI Licensing LLC in the United States and other countries.1 Spacer logoDo not pull on the spacer logo using force. The logo may tear orbreak off.2 Remote sensorPress a button on the remote control pointing at the bottom ofthe product face to perform the function. The remote controlsensor is located on the bottom of the product.* Using other display devices in the same space as the remotecontrol of this product can cause the other display devices tobe inadvertently controlled.3 Power buttonSpeaker1234568790! @ #

/ 2

Related manuals for Samsung QB98R