Samsung OHD Series Quick Setup Manual

Quick Setup GuideThe colour and the appearance may differ depending on the product, and the specificationsare subject to change without prior notice to improve the performance.Download the user manual from the website for further details.http://www.samsung.com/displaysolutionsOH46D OH55DBN6807250F00Reverse SideIssues SolutionsThe screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connection is secure.No Signal is displayed on the screen. Check that the product is connected correctly with a cable.Check that the device connected to the product is powered on.Not Optimum Mode is displayed. This message is displayed when a signal from the graphics card exceeds the product’s maximumresolution and frequency.Refer to the Standard Signal Mode Table and set the maximum resolution and frequency according tothe product specifications.The images on the screen look distorted. Check the cable connection to the product.The screen is not clear.The screen is blurry.Adjust Coarse and Fine.Remove any accessories (video extension cable, etc) and try again.Set the resolution and frequency to the recommended level.The screen appears unstable and shaky. Check that the resolution and frequency of the PC and graphics card are set within a range compatiblewith the product. Then, change the screen settings if required by referring to the Additional Informationon the product menu and the Standard Signal Mode Table.There are shadows or ghost images left onthe screen.There is no sound. Check the connection of the audio cable or adjust the volume.Check the volume.Troubleshooting GuideChecking the Components Power Box1 Connect to the power cord.2 Connect to the MAIN POWER cable to supply power to themainboard of the product.3 Connects to the BLU POWER cable to supply power to the LEDbacklight of the product.- Connect the cables to their matching colour ports. Make sure to matchthe arrow directions on the power box and cables.N Contact the vendor where you purchased the product if anycomponents are missing.Quick Setup Guide Warranty card(Not available in some locations)Regulatory guide Batteries(Not available in some locations)Remote Control MAIN POWER cableBLU POWER cable Power Box1 Connects to the power box using the MAIN POWER cable.2 Connects to the power box using the BLU POWER cable.3 Connect to a USB memory device.4 - Sends the HDMI signal to a connected LAN cable using an HDBaseT transmitter.- Connects to MDC using a LAN cable.5 Connects to a source device using an HDMI cable.6 Connects to MDC using an RS232C cable.7 Connects to the audio of a source device.133 41 2 567ILLUMINANCE SENSOR & REMOTE SENSOR Mount Hole2Mount HoleOutdoor Mode (MENU m → System → Fan and Temperature → Outdoor Mode)To use the product at a low temperature below 0 ˚C, make sure to set Outdoor Mode to "On".This feature keeps the internal temperature of the product steady so that the product can startproperly when it is powered on.- Do not disconnect the power cable when this feature is set to "On".- The product consumes more power when it is turned off if this feature is set to "On" ratherthan to "Off ".- If you turn on the product when the ambient temperature is low, there may be an initial delaywhen displaying a picture on the screen.The terms HDMI and HDMI High-Definition MultimediaInterface, and the HDMI Logo are trademarks or registeredtrademarks of HDMI Licensing LLC in the United Statesand other countries.OHD-INDIA-QSG_BN68-07250F-00.indd 1 2015-08-24 4:28:07

/ 2

Related manuals for Samsung LH55OHDPKBC/XL