Samsung P Series User Manual

Also see for PM32F-BC: Quick setup guide User manual User manual Quick setup guide Quick setup guide

35Chapter 2. Device setupAV connection• Do not connect the power cable before connecting all other cables.Ensure you connect a source device first before connecting the power cable.• You can connect a video device to the product using a cable.‒ Connecting parts may differ in different products.‒ Press the SOURCE button on the remote control to change the source.Connection using an HDMI-DVI cableThe appearance may differ depending on the product.• Audio will not be enabled if the product is connected to a video device using anHDMI-DVI cable. To resolve this, additionally connect an audio cable to the audioports on the product and video device.• After connecting a video device to the product with an HDMI-DVI cable, make sure toconfigure the settings as shown below to enable the video and audio from the videodevice.‒ Sound → set HDMI Sound to AV(HDMI)‒ Picture → set each screen mode to Videos/Images under Picture Mode‒ System → General → set HDMI Hot Plug to On• Supported resolutions include 1080p (50/60 Hz), 720p (50/60 Hz), 480p, and 576p.HDMI1, HDMI2AUDIO INDVI / PC / MAGICINFO INHDMI