Samsung OfficeServ SMT+i5220 User Manual

Also see for OfficeServ SMT-I5220: User manual User guide User guide Setup guide User guide

In case of 2 Dynamic IP.....Enter the System IP System ID (Phonenumber) Password, and press the Enter[OK]button.- The System information inquires to administrator.End Back1 Static IP2 Dynamic IP3 PPPoEEnter the System IP System ID (Phonenumber) Password, and press the Enter[OK]button.- The System information inquires to administrator. Del. Back165.213.80.109Enter System IPDel. Back7942Enter System IDDel. BackEnter Passward* * * *Wait for a minute.[Reboot Phone]Set DHCP Mode[Network Setting]Del. Back165.213.80.109Enter System IPDel. Back7942Enter System IDDel. BackEnter Passward* * * *In case of 3 PPPoE.....Enter the User ID Password System IPSystem ID (Phone number) Password, andpress the Enter[OK] button.- To change the text input mode press [ ] button repeatedly.(Refer to 28 page)- The System information inquires to administrator.End Back1 Static IP2 Dynamic IP3 PPPoEDel. BackAnonymousEnter User IDDel. BackEnter Passward* * * *The Unit is reboot automatically.Wait for a minute.[Reboot Phone]Preparations