Samsung OfficeServ SMT+i5220 User Manual

Also see for OfficeServ SMT-I5220: User manual User guide User guide Setup guide User guide

Firmware UpgradeYou can upgrade the IP Phone’s S/W.In Activation screen, select the 4 Upgrade, andpress the Enter[OK] button.- The Network information inquires to administrator.End2 Easy Install3 System Info4 Network Setting5 Firmware UpgradeIn case of 3 PPPoE.....Enter the User ID Password, and press theEnter[OK] button.- The PPPoE item is reserved for additional functions.- The Network information inquires to administrator.End Back1 Static IP2 Dynamic IP3 PPPoE4 VLAN(LAN Port)Del. BackAnonymousEnter User IDIn case of 4 VLAN(LAN Port).....Select the VLAN-HOST : Enable/Disable enterVLAN ID Priority, and press the Enter[OK]button.- The Network information inquires to administrator.End Back1 Static IP2 Dynamic IP3 PPPoE4 VLAN(LAN Port)Del. BackDisableIn case of 5 VLAN(PC Port).....Select the VLAN-PC : Enable/Disable enterVLAN ID Priority, and press the Enter[OK]button.- The Network information inquires to administrator.End Back2 Dynamic IP3 PPPoE4 VLAN(LAN Port)5 VLAN(PC Port)Del. BackDisableUnit is reboot for new condition automatically.Wait for a minute.[Reboot Phone]Select 1 TFTP Setting enter the Server IPAddress, and press the Enter[OK] button.- The firmware upgrade information inquires to administrator.End Back1 TFTP Setting2 Upgrade StartAfter setup the TFTP Settings, select 2 UpgradeStart.Press the Enter[OK] button to start upgradingfirmware and reboot automatically. End Back1 TFTP Setting2 Upgrade StartDel. BackPress ENTER button.165.213.110.59[Upgrade Server]BackPress ENTER button.[Start Upgrad]Preparations