Menu
Samsung NZ63H57 Series User Manual
                                        |
English - 11English - 11CONNECTING TO THE MAINS POWER SUPPLYBefore connecting, check that the nominal voltage of the appliance,that is, the voltage stated on the rating plate, corresponds to theavailable supply voltage. The rating plate is located on the lowercasing of the hob.WARNINGShut off power to circuit before connecting wires tocircuit.The heating element voltage is AC 230 V~. The appliance alsoworks perfectly on networks with AC 220 V~ or AC 240 V~.The hob is to be connected to the mains using a device thatallows the appliance to be disconnected from the mains atall poles with a contact opening width of at least 3 mm, eg.automatic line protecting cut - out, earth leakage trips or fuse.WARNINGThe cable connections must be made in accordance withregulations and the terminal screws tightened securely.WARNINGOnce the hob is connected to the mains supply, check that allcooking zones are ready for use by briefly switching each onin turn at the maximum setting with suitable cookware.When the hob is powered on for the first time, all displays lightand the child safety lock is activated.WARNINGPay attention (conformity) to phase and neutral allocationof house connection and appliance (connection schemes);otherwise, components can be damaged.Warranty does not cover damage resulting from improperinstallation.WARNINGIf the supply cord is damaged, it must be replaced by themanufacturer, its service agent or similarly qualified persons inorder to avoid a hazard.03 INSTALLING THE HOBNZ63H57470K_EF_DG68-00548A-00_EN.indd 11 2014-04-07 �� 5:32:53 |
Related manuals for Samsung NZ63H57 Series
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved