maintaining your appliance _67mAiNtAiNiNG your AppLiANcecHANGiNG tHe oVeN LiGHtThe oven light is a standard 40-watt appliance bulb. It will automatically come on whenthe oven door is opened. It can also be turned on and off when the oven door is closedby pressing the OVEN LIGHT pad on the oven control panel.The oven light will not work during a self-cleaning cycle.Disconnect electrical power to the range before replacing the oven light. This willprevent any personal injury due to electric shock.1. Make sure the oven and the light bulb are cool.2. Open the oven door.If the oven racks are in the way, they can be repositioned or removed before youchange the oven light.3. Turn the glass light cover in the rear upper-right corner counterclockwise to remove it.4. Turn the bulb counterclockwise to remove it from its socket.5. Replace the bulb with a new 40-watt appliance bulb. Turn the bulb clockwise until itis seated securely in the socket.6. Replace the glass light cover by turning it clockwise until it is seated securely.7. Close the oven door and reconnect the electrical power to the range.WARNINGoven light cover and bulbUser manual NX58H5 Series_DG68-00526A-02_EN+CFR.indb 67 2015-06-25 �� 11:03:43