Samsung NX58H5600S Series User Manual

Also see for NX58H5600S series: Installation manual Installation manual User manual User manual Installation manual

22_ surface cookingsurface cookingBEFORE USING THE SURFACE BURNERS, make sure to follow all the safetywarnings and precautions listed on page 8. Failure to do so could result in productdamage, personal injury, and/or death.LiGHtiNG A GAS SurfAce BurNerMake sure all surface burners are positioned andassembled properly.1. Push in and turn the control knob to the LITEposition. You will hear a “clicking” soundindicating the electronic ignition system isworking properly.2. After the surface burner lights, turn the controlknob to adjust the power setting of the surfaceburner and turn off the electronic ignitionsystem.We highly recommend using the left rear side burner for simmering tomato sauceand right rear side burner for melting chocolatemANuALLy LiGHtiNG A GAS SurfAce BurNerIf a power failure occurs, the surface burners can still be lit manually.Use extreme caution when manually lighting a surface burner.1. Hold a long gas grill lighter to the surface burner you want to light.2. Push in and turn the control knob for that burner to the LITE position.3. After the burner has lit, set the control knob and the burner to the desired setting.fLAme SiZe SeLectioNFlames larger than the bottom of the cookware will not result in faster heating, butcould result in a fire hazard and/or personal injury.The flames on the burners should always stay under the cookware. The flames shouldnever extend beyond the bottom surface and/or up the sides of the cookware.Always watch the flames when adjusting the heat setting with the control knob(s). Theflames should always match the size of the cookware being used.WARNINGWARNINGUser manual NX58H5 Series_DG68-00526A-02_EN+CFR.indb 22 2015-06-25 �� 11:03:14