22 EnglishOperationsOperationsSemi-automatic time adjustment(finishing time)This function automatically starts the ovenso that cooking will finish at a set time.You can set an end time of up to 10 hoursafter the current time of day. Prepare thefood for cooking and put it in the oven.1. Select the desired cooking function andthe temperature using the control knobs.2. Press “TIMER MODE”until you see “end”symbol on the displayscreen. “A” and thecurrent time of day willflash.3. Use the “+” and“-” buttons to set thedesired finishing time.4. The current time willreappear on the screen,the symbols “A”, willremain illuminated.When the timer reaches zero, the ovenwill switch off and an audible warning willsound. The symbol “A” will flash. Turn bothcontrol knobs to the “0” position and pressany key on the timer to stop the sound.The symbol will disappear and the timerwill switch back to manual function.Full-automatic programmingThis function is used to start cooking aftera certain period of time and for a certainduration. A time of up to 23 hours and 59minutes after the current time of day canbe set. Prepare the food for cooking andput it in the oven.1. Select the desired cooking function andthe temperature using the control knobs.2. Press “TIMER MODE”until you see “dur”symbol on the screen.The symbol “A” will flash.3. Select the desiredcooking time periodusing the “+” and “-”keys.4. The current time willreappear on the screen,the symbols “A”, andwill remain illuminated.5. Press “TIMER MODE”until you see “end”symbol on the screen.The time and thesymbols “A” will flash.6. Select the desiredfinishing time using the“+” and “-” keys.7. Add the cookingperiod to the currenttime of day. You can seta time of up to 23 hoursand 59 minutes afterthis.