Samsung MX-J630 User Manual

Also see for MX-J630: User manual User manual

16 EnglishListening to RadioAfter you have set the timer, the unit will startautomatically at the time shown by the TIMERindication on the display. If you no longer wantto use the timer, you must cancel it.1. Press the TIMER ON/OFF button to cancel thetimer.2. Press the TIMER ON/OFF button again to restartthe timer.• When you select the OFF-TIMER mode, the TIMERRECORDING and TIMER function are not available.Cancelling the TimerYou can store up to 15 FM stations.Using buttons on the Remote Control1. Press the TUNER button to select FM.2. Tune to the desired station.• Preset Tuning : Press the TUNING MODE buttonto select PRESET, and then press TUNING [ or] button to select the preset station.• Automatic Tuning : Press the TUNING MODEbutton to select MANUAL, and then pressand hold the TUNING [ or ] button toautomatically search for active broadcastingstations.• Manual Tuning : Press the TUNING MODEbutton to select MANUAL, and then brieflypress the TUNING [ or ] button to increaseor decrease the frequency incrementally.Using buttons on the Main Unit1. Press the TUNER/AUX button to select FM.• You may use the ], [ buttons or theVOLUME/JOG control on the main unit insteadof the , or . button to adjust settings in Steps4 through 9.• If the switch-on or -off time is the same as thetimer recording time, only the switch-on or-off time is effective, and the timer recordingtime is not applied.• If the auto timer is turned on, the MP3/CD orUSB function may require an additional step tobe activated depending on the disc (or device).It is better for you to select the tuner functioninstead.2. Tune to the desired station.• Preset Tuning : Press the STOP ( @ ) button toselect PRESET, and then press [ or ] buttonto select the preset station.• Automatic Tuning : Press the STOP ( @ ) buttonto select MANUAL, and then press and hold the[ or ] button to automatically search foractive broadcasting stations.• Manual Tuning : Press the STOP ( @ ) buttonto select MANUAL, and then briefly press the[ or ] button to increase or decrease thefrequency incrementally.Selecting Mono or Stereo1. Press the MO/ST button.• Each time you press the button, the soundswitches between STEREO and MONO.• In a poor reception area, select MONO for aclear, interference-free broadcast.• This applies only when listening to an FMstation.Presetting StationsExample : Presetting FM 89.10 in the memory.1. Press the TUNER button to select FM.2. Press the TUNING MODE button to select the<MANUAL> mode.3. Press the TUNING [ or ] button to select<89.10>.4. Press the MEMORY button.• FM followed by a flashing number appears inthe display. That number is the current presetnumber.5. Press the TUNING [, ] or the ,, . buttons toscroll through and select a preset number.• You can select a number from 1 to 15.6. Press the ENTER ( ) button.• Press the ENTER ( ) button before numberdisappears from the display.• Number disappears from the display and thestation is stored in memory.7. To preset another station, repeat steps 2 to 6.• To tune to a preset station, press the TUNING [or ] to select a channel.• You can also use the [ or ] button on thefront panel instead of the TUNING [ or ]button in step 3, 5, 7.