Samsung MX-J630 User Manual

Also see for MX-J630: User manual User manual

English 14English 155. Set the timer switch-off time.a. Press the , or . button to set the hours.b. Press the ENTER ( ) button.Result: The minutes flash.c. Press the , or . button to set the minutes.d. Press the ENTER ( ) button.Result: VOL XX is displayed, where XX corre-sponds to the volume already set.6. Press the , or . button to adjust the volumelevel, and then press the ENTER ( )button.Result: The source to be selected is displayed.7. Press the , or . button to select the desiredsource to be played when the system switcheson.If you select... You must also...FM (radio) a Press the ENTER ( ) button.b Select a preset station by pressingthe , or . button.CD/MP3 (compact disc) Load one compact disc.USB Connect the USB device.8. Press the ENTER ( ) button.Result: CHKREC (Do you want to record?) is dis-played.9. Press the ENTER ( ) button.Result: REC N is displayed. You can press the ,or . button to select REC Y or REC N, and thenpress ENTER ( ) button.1). If you select REC N, the MiNi Hi-Fi Componentwill not record when it turns on. If you havealready set a tuner timer recording, selectingREC N cancels it. Note that the MiNi Hi-FiComponent will still turn on and off at thetimes you set earlier in this procedure.2). If you select the REC Y, you can set the MiNiHi-Fi Component to record when it turns on.The recording switch on and switch off timescan be different from the timer switch on andoff times you set earlier in this procedure.a. Press the ENTER ( ) button.Result: ON is displayed for a few seconds.You can set the tuner timer recordingswitch-on time.b. Press the ENTER ( ) button.Result: OFF is displayed for a few seconds.You can set the tuner timer recordingswitch-off time.• The maximum tuner timer recording time is 5hours.• If the timer switch on and off times areidentical, the word ERROR is displayed.• When there is no disc in or USB connectedto the MiNi Hi-Fi Component, if you select"MP3/CD" or "USB 1 or USB 2", the MiNi Hi-FIComponent automatically selects "TUNER".Timer FunctionSetting the ClockDuring each step, you have a few seconds to setthe required options. If you exceed this time, youmust start again.1. Switch the system on by pressing the POWER( ) button.2. Press the TIMER SET button and then press theENTER ( ) button, "CLOCK" is displayed.3. Press the ENTER ( ) button. The hour flashes.• To increase the hours, press: ,• To decrease the hours, press: .4. When the correct hour is displayed, press theENTER ( ) button. The minutes flash.• To increase the minutes, press: ,• To decrease the minutes, press: .5. When the correct minute is displayed, press theENTER ( ) button. " TIME" appears in thedisplay.• The current time is now set.• You can display the time, even when you areusing another function, by pressing theTIMER SET button once.• You can also use the ], [ or theVOLUME/JOG control on the front panelinstead of the , or . button in Steps 3 and4.The timer enables you to switch the system on oroff at specific times automatically.• Before setting the timer, confirm that the currenttime is correct.• During each step, you have a few seconds to setthe required options. If you exceed this time, youmust start again.• If you no longer want the system to be switchedon or off automatically, cancel the timer bypressing the TIMER ON/OFF button.Example: You want to wake up to music every morning.1. Switch the system on by pressing thePOWER ( )button.2. Press the TIMER SET button until TIME isdisplayed.3. Press the ENTER ( ) button.Result: ON is displayed for a few seconds. Youcan set the timer switch-on time.4. Set the timer switch-on time.a. Press the , or . button to set the hours.b. Press the ENTER ( ) button.Result: The minutes flash.c. Press the , or . button to set the minutes.d. Press the ENTER ( ) button.Result: OFF is displayed for a few seconds. Youcan now set the timer switch-off time.