|
ENG16g External ComponentsConnecting the FM AntennasFM Antenna (supplied)FM antenna connection1. Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal as a temporary measure.2. Slowly move the antenna wire around until you find a location where reception is good, thenfasten it to a wall or other rigid surface.• If reception is poor, connect an outdoor antenna.Before attaching a 75Ω coaxial cable (with a standard type connector), disconnect the supplied FMantenna.CONNECTIONSr to Audio Out on the external analog component.a VCR, Camcorder, and TV.g ComponentAudio CableIf the external analog componenthas only one Audio Out, connecteither left or right.plied) Connect the Digital Input(OPTICAL) on the Mini Component to the Digital Output of theexternal digital component.1Digital signal components such as a Cable Box/Satellite receiver(Set -Top Box).OPTICAL:Connecting an External Digital ComponentPress the AUX/PORT button to select DIGITAL IN.2Optical Cable(not supplied)Extermal Digital Component• This unit does not receive AM broadcasts.Note1 Connect AUX IN 2 (Audio) on the MINICOMPONENT rear panel to the Audio Out of theexternal analog component.■ Be sure to match connector colors.2 Press the AUX/PORT button to select input.The mode switches as follows : AUX 1 ➝ AUX 2.nal Analog ComponentPage 18 PreviousNext |