English - 26Setting the Film ModeThe TV can be set to automatically sense and process film signals from all sources andadjust the picture for optimum quality.1. Follow the “Activating Picture Options” instructions numbers 1 and 2.(Refer to page 23)2. Press the ▲ or ▼ button to select "Film Mode", then press the ENTER button.3. Press the ▲ or ▼ button to select "Off" or "Auto", then press the ENTER button.Press the ExIT button to exit." Film mode" is supported in TV, VIDEO, S-VIDEO, COMPONENT(480i / 1080i)and HDMI(480i / 1080i).Picture OptionsColor Tone : Normal ►Size : 16:9 ►Digital NR : Auto ►DNle : Off ►HDMI Black Level : Normal ►Film Mode : Off ►Blue Only Mode : Off ►TVMove Enter ReturnPicture OptionsColor Tone : NormalSize : 16:Digital NR : AutoDNle : OffHDMI black Level : NormalFilm Mode : Offblue Only Mode : OffTVMove Enter ReturnOffAutoSetting the blue Only ModeThis function is for AV device measurement experts. This function displays the bluesignal only by removing the red and green signals from the video signal so as to providea Blue Filter effect that is used to adjust the Color and Tint of video equipment such asDVD players, Home Theaters, etc.Using this function, you can adjust the Color and Tint to preferred values appropriate tothe signal level of each video device using the Red/Green/Blue/ Cyan/Magenta/YellowColor Bar Patterns, without using an additional Blue Filter.1. Follow the “Activating Picture Options” instructions numbers 1 and 2.(Refer to page 23).2. Press the ▲ or ▼ button to select "Blue Only Mode", then press the ENTERbutton.3. Press the ▲ or ▼ button to select "Off" or "On", then press the ENTER button.Press the ExIT button to exit.“Blue Only Mode” is available when the picture mode is set to “Movie” or“Standard”.Picture OptionsColor Tone : Normal ►Size : 16:9 ►Digital NR : Auto ►DNle : Off ►HDMI Black Level : Normal ►Film Mode : Off ►Blue Only Mode : Off ►TVMove Enter ReturnPicture OptionsColor Tone : NormalSize : 16:Digital NR : AutoDNle : OffHDMI black Level : NormalFilm Mode : Offblue Only Mode : OffTVMove Enter ReturnOffOnResetting the Picture Settings to the Factory Defaults1. Press the MENU button to display the menu.Press the ENTER button, to select “Picture”.2. Press the ▲ or ▼ button to select "Reset", then press the ENTER button.Press the ▲ or ▼ button to select “OK” or “Cancel” then press the ENTERbutton.Press the ExIT button to exit.Each mode can be reset. Move Enter Return▲ MoreDetailed SettingsPicture OptionsReset : OKPictureTVOKCancel
