English - 1Plug & Play FeatureWhen the TV is initially powered on, basic settings proceed automatically andsubsequently.1. Press the POWER button on the remote control.The message “Menu Language, Store Demo, Channels and Time will be set.” isdisplayed.Press the ENTER button, then “Select the language of the OSD” menuis automatically displayed.2. Press the ▲ or ▼ button to select language, then press the ENTER button.The message “Select ‘Home Use’ when installing this TV in your home.” isdisplayed.3. Press the ◄ or ► button to select “Store Demo” or “Home Use”, thenpress the ENTER button.The message “Select the antennas to memorize.” is displayed.We recommend setting the TV to “Home Use” mode for the best picture in yourhome environment.“Store Demo” mode is only intended for use in retail environments.If the unit is accidentally set to “Store Demo” mode and you want to return to“Home Use” (Standard): Press the Volume button on the TV. When the volumeOSD is displayed, press and hold the MENU button on the TV for 5 seconds.4. Press the ▲ or ▼ button to memorize the channels of the selected connection.Press the ENTER button to select “Start”.Air: “Air” antenna signal.Cable: “Cable” antenna signal.Auto: “Air” and “Cable” antenna signals.In Cable mode, you can select the correct signal source among STD, HRC, andIRC by pressing the ▲, ▼, ◄ or ► button, then press the ENTER button. Ifyou have Digital cable, select the cable system signal source for both Analog andDigital. Contact your local cable company to identify the type of cable system thatexists in your particular area.5. The TV will begin memorizing all of the available channels.To stop the search before it has finished, press the ENTER button with “Stop”selected.After all the available channels are stored, it starts to remove scrambled channels(see page 31). The Auto program menu then reappears.Press the ENTER button when channel memorization is complete.The message “Set the Clock Mode.” is displayed.Turning the TV On and OffPress the POWER button on the remote control.You can also use the POWER button on the TV.OperationLanguage :Plug & PlayEnglishEspañolFrançaisMove EnterSelect the language of the OSD.Select ‘Home Use’ when installingthis TV in your home.Plug & PlayStore Demo Home UseMove EnterSelect the antennas to memorize.StartAirPlug & PlayCableAutoStartStartMove Enter SkipPlug & PlayEnterMenu Language, Store Demo,Channels and Time will be set.StartPlug & Play50 %Enter SkipAuto Program in Progress.DTV Air : 02 Air : 11DTV Cable : 2 Cable : 21 Cable 50Auto ProgramStopPlug & Play77 %Enter SkipRemoving scrambled channel.DTV Cable 41Auto ProgramStopSelects a cable signal type for your location.Plug & PlayMove Enter SkipAnalogStartSTDHRCIRCDigitalSTDHRCIRC
