Samsung HW-Q600A Full Manual

Also see for HW-Q600A: Full manual Full manual Full manual

ENG - 24Using Tap SoundTap the Soundbar with your mobile device to play audio from the mobile device through the Soundbar.• This function may not be supported, depending on the mobile device.• This function is only compatible with Samsung mobile devices with Android 8.1 or later.Mobile deviceSmartThings App Top of the Soundbar1. Turn on the Tap Sound function on your mobile device.• For details on how to turn on the function, refer to “Enable the Tap Sound function” below.2. Tap the Soundbar with the mobile device. Select “Start now” in the displayed message window.A connection is established between the mobile device and Soundbar via Bluetooth.3. Play audio from the mobile device through the Soundbar.• This function connects a mobile device to the Soundbar via Bluetooth by detecting vibrationthat occurs when the device touches the Soundbar.• Make sure the mobile device does not tap a sharp corner of the Soundbar. The Soundbar ormobile device may become scratched or damaged.• It is recommended that the mobile device be covered with a case. Lightly tap the wide area inthe upper portion of the Soundbar, without using excessive force.• To use this function, update the SmartThings app to the latest version.The function may not be supported, depending on the app version.Enable the Tap Sound functionUse the SmartThings app to turn on the Tap View, Tap Sound function.1. On the mobile device, run the SmartThings app.2. Select ( → ) in the SmartThings app screen displayed on the mobile device.3. Set “Tap View, Tap Sound” to On to allow the function to work when a mobile device moves close tothe Soundbar.NOTES• When the mobile device is in power-saving mode, the Tap Sound function does not work.• The Tap Sound function may not work if there are devices near the Soundbar that cause radiointerference such as electric devices. Make sure devices that may cause radio interference areplaced at a sufficient distance away from the Soundbar.