Samsung HW-Q600A Full Manual

Also see for HW-Q600A: Full manual Full manual Full manual

ENG - 312. Align the Wall Mount Guide’s Center Linewith the center of your TV (if you aremounting the Soundbar below your TV), andthen fix the Wall Mount Guide to the wallusing tape.• If you are not mounting below a TV, placethe Center Line in the center of theinstallation area.Center Line3. Push a pen tip or sharpened pencil tipthrough the center of the A-TYPE images oneach end of the Guide to mark the holes forthe supporting screws, and then remove theWall Mount Guide.4. Using an appropriately sized drill bit, drill ahole in the wall at each marking.• If the markings do not correspond to thepositions of studs, make sure you insertappropriate anchors into the holes beforeyou insert the support screws. If you useanchors, make sure the holes you drill arelarge enough for the anchors you use.5. Push a screw (not supplied) through eachHolder-Screw, and then screw each screwfirmly into a support screw hole.6. Install the 2 Bracket-Wall Mounts in thecorrect orientation on the bottom of theSoundbar using 2 Screws.• When assembling, make sure the hangerpart of the Bracket-Wall Mounts arelocated behind the rear of the Soundbar.Rear of SoundbarRight end of Soundbar